How to Install and Run Android in PC [Windows and Linux]

The mobile smartphone and tablet industry seems to have a very prominent divide, with a lot of consumers having their favorite operating system and choosing to stick to hardware which is powered by their chosen OS. Obviously fans of Apple’s iOS use the iPhone and iPad devices, whereas Android lovers have a wide range of hardware to choose from due to the fact that the OS is available to multiple manufacturers.

Here are Some Steps Given to Install Android On Your PC.

Step 1: Install official Oracle VM VirtualBox Go Here & download the relevant VirtualBox binary for your computers operating system (Windows/Mac OS X/Linux/Solaris)

Download VirtualBox

Step 2: Find the saved location of the downloaded VirtualBox and install on your PC by following all screen prompts and instructions.

Must Read : Send and Receive WhatsApp Messages on Windows PC

Step 3: Now Download a copy of Android v4 Ice Cream Sandwich it is of size 88MB so the download may take some time depending on your connection.

Download v4 Ice Cream Sandwich

Step 4: Locate the downloaded ‘Android-v4.7z‘ file and extract the contents of it.

Step 5: Once the Android-v4.7z file has been opened, locate a file called ‘Android-v4.vbox‘ which can be directly opened in Virtualbox

Step 6: Double click on the Android-v4.vbox file which will load the VirtualBox application and boot up the ICS file.

Step 7: When the boot menu is presented in VirtualBox, press ‘start‘ on the top toolbar and then if required select the ‘Android Startup from /dev/sda‘ option.

Step 8: All steps are complete. Android 4.0 ICS should now be booting up allowing you to enjoy that Android in your PC, It just look like a TABLET

Top 12 Android Apps to Turn Your Smartphone into a Hacking Device

 Mobile devices is now very common now a days and mobile devices has changed the way of bi-directional communication. There are many operating system for mobile devices available but the most common and the best operating system for mobile is Android, it is an OS means you can install other applications (software's) on it. InAndroid application usually called apps or android apps.

The risk of hacking by using mobile devices is very common and people are developing and using different apps (application) for their hacking attack. Android has faced different challenges from hacking application and below is the list of application for android hacking.

1. SpoofApp

Here is an app that spies at heart could use – SpoofApp. It allows you to use a fake Caller ID – a number that you are free to specify yourself, in order to protect your privacy or to pull a prank on someone. Sounds like fun, doesn’t it? Well, Apple didn’t think so, which is why it never allowed the app to enter its App Store. Google, however, didn’t mind, which is why SpoofApp was available on the Android Market for about two and a half years. However, it was banned from there last year as it allegedly was in conflict with The Truth in Caller ID Act of 2009.This can be useful in social engineering. 

Download it from here

2. FaceNiff

Requirements: Android 2.1+ (rooted)

Overview: FaceNiff is an Android app that allows you to sniff and intercept web session profiles over the WiFi that your mobile is connected to.

It is possible to hijack sessions only when WiFi is not using EAP, but it should work over any private networks (Open/WEP/WPA-PSK/WPA2-PSK). It’s kind of like Firesheep for android. Maybe a bit easier to use (and it works on WPA2!). Please note that if webuser uses SSL this application won’t work.

Legal notice: This application is for educational purposes only. Do not try to use it if it’s not legal in your country. I do not take any responsibility for anything you do using this application. Use at your own risk

Learn More: http://goh4x.blogspot.in/2012/09/how-to-hack-friends-facebook-account.html

  

3. Penetrate Pro

Requirements: Android 2.1+ (rooted)

Overview: The most of the times you scan the Wi-Fi networks available around, they’re protected with key. Penetrate is an app that help you out with that. If the routers of that Wi-Fi networks are encrypted with WEP/WPA it will bring you the keys to access them. This seems a sort of cracking, but the developers says it isn’t, because it’s supposed to get the keys for penetration testing and you should use it only with permission from network owners. Well, apart from those regardings, it does what it says. Check the developer description to know which routers are supported.

Take in account that if you have an antivirus installed in your device, it will warn you about this app. The developer says it’s normal because it’s a security-related tool. Penetrate isn’t a danger for your phone.

This is the paid version (€1.99) that contains no ads, some more features and sponsors further development. What’s more, it allows you to use 3G to get the password instead of using dictionaries that you will have to download in the free version.

Penetrate works properly with the range of routers supported. We’re missing more though. Despite the apparent use for which it was developed this application, we all know the “regular” use. And if you’re looking for it, give it a chance. It’s a great app.

Download it from here

4. Anti-Android Network Toolkit

Requirements: Android 2.1+ (rooted)

Anti-Android Network Toolkit is an app that uses WiFi scanning tools to scan networks. You can scan a network you have the phone connected to or you can scan any other nearby open networks. Security admins can use Anti to test network host vulnerabilities to DoS attacks and other threats.

Download it from here

5. Andosid

AnDOSid is the application which is used for DOS attacks from Android mobile phones.

Download it from here

6. Nmap For Android

Nmap is a network scanner tool which gives the entire information of the ip address and website. There is a version of nmap for Android users too, with the help of this app hackers can scan the ip's through mobiles.
 
Download it from here

7. The Android Network Toolkit

The Android Network Toolkit is an complete tool kit for the pentesters , where hackers can find expolots using the mobile and penetrate or attacks the ip's according to their vunerabilities.

Download it from here

  

8. SSHDroid- Android Secure Shell

Secure shell or SSH is the best protocol that provides an extra layer of security while you are connecting with your remote machine.SSHDroid is a SSH server implementation for Android.
This application will let you to connect to your device from a PC and execute commands (like "terminal" and "adb shell").

Download it from here

10. WiFi Analyzer

WiFi Analyzer is one of the most popular applications in the Android Marketplace, which is really a testament to how wildly useful this tool is for both the average user and the more technically inclined. In the most basic of terms, WiFi Analyzer is a tool to scan the area for WiFi networks and determine which channel is the least populated so you can adjust your own hardware to a less congested part of the spectrum.

Download it from here 

11. ConnectBot

ConnectBot is an exceptionally well done SSH/Telnet client, which also acts as a terminal emulator for the local Linux sub-system. While there are better terminal emulators (though not for free), there is no question that ConnectBot is the absolute best SSH client available for Android. 

Download it from here 

12. Network Discovery

Network Discovery is a handy tool for finding and enumerating devices on public WiFi networks. Network Discovery uses a simple ping scan to find hosts on the network, and then allows the user to select one of the found hosts to target for a TCP connect() scan. 

Download it from here
 
Bonus : dSploit
dSploit is an Android network analysis and penetration suite which aims to offer to IT securityexperts/geeks the most complete and advanced professional toolkit to perform network security assesments on a mobile device. Once dSploit is started, you will be able to easily map your network, fingerprint alive hosts operating systems and running services, search for known vulnerabilities, crack logon procedures of many tcp protocols, perform man in the middle attacks such as password sniffing ( with common protocols dissection ), real time traffic manipulation, etc, etc . 

MULTI CAMMANDER EXPLORER PRO

Microsoft Windows Explorer is great for general file management tasks. However, there are several more complicated tasks that Windows Explorer is unable to handle. This is where Multi Commander can come in handy. Multi Commander is a fantastic and free file manager that allows you to manage your files and perform many tasks not possible through Windows Explorer. In the picture, is an example of the Multi Commander interface. As can be seen, the interface is very similar to Windows Explorer with additional features such as multiple panes, tabs, and buttons.

---Some of the many features in Multi Commander---

*Compare the right and left file explorers with each other and show what is different.
*Built using Extension/Plug-in architecture that allows for almost any imaginable feature to be added.
*Easily filter and copy or move only the files specified in the filter.
*Excellent keyboard support for anyone who enjoys keyboard shortcuts or just avoiding the mouse.
*Convert files between Unix (LF), Windows (CRLF), and Mac (CR) format.
*Browse and read files within a RAR without extracting the files.
*Quickly change a file or folder name to all lowercase, all uppercase, or Camel case.
*Browse, update, and modify the system registry.
*Create and verify the MD5 and SFV (CRC32) Checksum of files using the MC-Checksum extension.
*Tab support to have multiple folders open at once.
*Script engine support to create scripts to automate tasks.
*FTP support.
*Save and load a selection of files and folders to memory or to a file.

Download : http://multicommander.com/downloads/
Xen4_H4xt0r

CONF PAT

          CONF PAT

Now configure to ROUTER 0 as given below


Router>enable
Router#configure terminal Enter configuration
commands, one per line. End with CNTL/Z.
Router(config)#hostname R1
R1(config)#interface fastEthernet 0/0
R1(config-if)#ip address 192.168.0.1 255.255.255.0
R1(config-if)#no shutdown
R1(config-if)#exit
R1(config)#interface serial 0/0/0
R1(config-if)#ip address 30.0.0.1 255.0.0.0
R1(config-if)#clock rate 64000
R1(config-if)#bandwidth 64
R1(config-if)#no shutdown
R1(config-if)#exit
R1(config)#ip route 0.0.0.0 0.0.0.0 serial 0/0/0
R1(config)#access-list 1 permit 192.168.0.0
0.0.0.255
R1(config)#ip nat pool test 50.0.0.1 50.0.0.1
netmask 255.0.0.0
R1(config)#ip nat inside source list 1 pool test
overload
R1(config)#interface fastEthernet 0/0
R1(config-if)#ip nat inside
R1(config-if)#exit
R1(config)#interface serial 0/0/0
R1(config-if)#ip nat outside
R1(config-if)#exit
R1(config)# Router(config)#interface serial 0/0/0
 Router(config-if)#no shutdown


Now configure to ROUTER 1 as given below


Router>enable
Router#configure terminal                              
  Router(config)#interface serial 0/            Router(config-if)#ip address 30.0.0.2 255.0.0.0                    Router(config-if)#no shutdown                                       Router(config-if)#exit
Router(config)#interface fastEthernet 0/0
Router(config-if)#ip address 20.0.0.1 255.0.0.0
Router(config-if)#no shutdown
Router(config-if)#exit
Router(config)#hostname R2
R2(config)#ip route 0.0.0.0 0.0.0.0 serial 0/0/0


Now go on pc and ping to 20.0.0.2

DYNAMIC NAT- CICSO ROUTER CONF

DYNAMIC NAT

IN ROUTER 0

Router>enable
Router#configure terminal
Router(config)#hostname R1
R1(config)#interface fastethernet 0/0
R1(config-if)#ip address 192.168.0.1 255.0.0.0
R1(config-if)#no shutdown
R1(config-if)#exit
R1(config)#interface serial 0/0/0
R1(config-if)#ip address 30.0.0.1 255.0.0.0
R1(config-if)#clock rate 64000
R1(config-if)#bandwidth 64
R1(config-if)#no shutdown
R1(config-if)#exit
R1(config)#ip route 0.0.0.0 0.0.0.0 serial 0/0/0
R1(config)#access-list 1 permit 192.168.0.0 0.0.0.255
R1(config)#ip nat pool test 50.0.0.1 50.0.0.5
netmask 255.0.0.0
R1(config)#ip nat inside source list 1 pool test
R1(config)#interface fastEthernet 0/0
R1(config-if)#ip nat inside
R1(config-if)#exit
R1(config)#interface serial 0/0/0
R1(config-if)#ip nat outside
R1(config-if)#exit
R1(config)#exit

In Router 1

Router>enable
Router#configure terminal
Router(config)#interface fastEthernet 0/0
Router(config-if)#ip address 20.0.0.1 255.0.0.0
Router(config-if)#no shutdown
Router(config-if)#exit
Router(config)#interface serial 0/0/0
Router(config-if)#ip address 30.0.0.2 255.0.0.0
Router(config-if)#no shutdown
Router(config-if)#exit
Router(config)#ip route 0.0.0.0 0.0.0.0 serial 0/0/0
Router(config)#hostname R2

        For testing of NAT go R1 and enable debug for NAT from privilege mode

  R1#debug ip nat

Now go on pc and ping to 20.0.0.2                                                                                  FaZfAj!®

Configuring OSPF Routing Protocol Step by step configuration

Configuring OSPF Routing Protocol Step by step configuration

In this article I will demonstrate an example of OSPF Routing configuration. We will use four different series router so you can get familiar with all different platform covered in CCNA exam. Create a topology as shown in figure.

1841 Series Router0 (R1)
	FastEthernet0/0	Serial0/0/0
IP address	10.0.0.1	20.0.0.1
Connected With	Pc0	R2 on Serial 0/0

2811 Series Router0 (R4)
	FastEthernet0/0	Serial0/0/0
IP address	50.0.0.1	40.0.0.2
Connected With	Pc1	R3 on Serial 0/0

2621XM Series Router0 (R3)
	FastEthernet0/0	Serial0/0/0
IP address	30.0.0.2	40.0.0.1
Connected With	FastEthernet0/0	R4 on Serial 0/0/0

2620XM Series Router1 (R2)
	FastEthernet0/0	Serial0/0
IP address	30.0.0.1	20.0.0.2
Connected With	R3 on FastEthernet0/0	R1 on Serial 0/0/0

PC-PT PC0
	FastEthernet0	Default Gateway
IP address	10.0.0.2	10.0.0.1
Connected With	R1 on FastEthernet0/0

PC-PT PC1
	FastEthernet0	Default Gateway
IP address	50.0.0.2	50.0.0.1
Connected With	R4 on FastEthernet0/0

Configuring OSPF is slightly different from configuring RIP. When configuring OSPF, use the following syntax:

Router(config)# router ospf process_ID
Router(config-router)# network IP_address wildcard_mask area area_#

The process_ID is locally significant and is used to differentiate between OSPF processes running on the same router. Your router might be a boundary router between two OSPF autonomous systems, and to differentiate them on your router, you will give them unique process IDs. Note that these numbers do not need to match between different routers so they have nothing to do with autonomous system numbers.

To configure any router double click on it and select CLI.To configure this topology use this step by step guide.

(1841Router0) Hostname R1

To configure and enable ospf routing on R1 follow these commands exactly.

Router>enable
Router#configure terminal
Enter configuration commands, one per line.  End with CNTL/Z.
Router(config)#hostname R1
R1(config)#interface fastethernet 0/0
R1(config-if)#ip address 10.0.0.1 255.0.0.0
R1(config-if)#no shutdown
%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up
%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up
R1(config-if)#exit
R1(config)#interface serial 0/0/0
R1(config-if)#ip address 20.0.0.1 255.0.0.0
R1(config-if)#clock rate 64000
R1(config-if)#bandwidth 64
R1(config-if)#no shutdown
%LINK-5-CHANGED: Interface Serial0/0/0, changed state to down
R1(config-if)#exit
%LINK-5-CHANGED: Interface Serial0/0/0, changed state to up
R1(config)#router ospf 1
R1(config-router)#network 10.0.0.0 0.255.255.255 area 0
R1(config-router)#network 20.0.0.0 0.255.255.255 area 0
R1(config-router)#exit
R1(config)#

(2620XM-Router1) Hostname R2

To configure and enable ospf routing on R2 follow these commands exactly.

Router>enable
Router#configure terminal
Enter configuration commands, one per line.  End with CNTL/Z.
Router(config)#hostname R2
R2(config)#interface serial 0/0
R2(config-if)#ip address 20.0.0.2 255.0.0.0
R2(config-if)#no shutdown
%LINK-5-CHANGED: Interface Serial0/0, changed state to up
%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0, changed state to up
R2(config-if)#exit
R2(config)#interface fastethernet 0/0
R2(config-if)#ip address 30.0.0.1 255.0.0.0
R2(config-if)#no shutdown
%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up
R2(config-if)#exit
%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up
R2(config)#router ospf 2
R2(config-router)#network 20.0.0.0 0.255.255.255 area 0
R2(config-router)#network 3
00:03:10: %OSPF-5-ADJCHG: Process 2, Nbr 20.0.0.1 on Serial0/0 from
 LOADING to FULL, Loading Done0.0.0.0 0.255.255.255 area 0
R2(config-router)#network 30.0.0.0 0.255.255.255 area 0
R2(config-router)#exit
R2(config)#

(2620XM-Router2)Hostname R3

To configure and enable ospf routing on R3 follow these commands exactly.

Router>enable
Router#configure terminal
Enter configuration commands, one per line.  End with CNTL/Z.
Router(config)#hostname R3
R3(config)#interface fastethernet 0/0
R3(config-if)#ip address 30.0.0.2 255.0.0.0
R3(config-if)#no shutdown
%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up
%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up
R3(config-if)#interface serial 0/0
R3(config-if)#ip address 40.0.0.1 255.0.0.0
R3(config-if)#clock rate 64000
R3(config-if)#bandwidth 64
R3(config-if)#no shutdown
%LINK-5-CHANGED: Interface Serial0/0, changed state to down
R3(config-if)#exit
%LINK-5-CHANGED: Interface Serial0/0, changed state to up
%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0, changed state to up
R3(config)#router ospf 3
R3(config-router)#network 40.0.0.0 0.255.255.255 area 0
R3(config-router)#network 30.0.0.0 0.255.255.255 area 0
00:04:53: %OSPF-5-ADJCHG: Process 3, Nbr 30.0.0.1 on FastEthernet0/0 from
 LOADING to FULL, Loading D
R3(config-router)#exit
R3(config)#
%SYS-5-CONFIG_I: Configured from console by console
R3#

(2811Router3) Hostname R4

To configure and enable ospf routing on R4 follow these commands exactly.

Router>enable
Router#configure terminal
Enter configuration commands, one per line.  End with CNTL/Z.
Router(config)#interface serial 0/0/0
Router(config-if)#ip address 40.0.0.2 255.0.0.0
Router(config-if)#no shutdown
%LINK-5-CHANGED: Interface Serial0/0/0, changed state to up
%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/0, changed state to up
Router(config-if)#exit
Router(config)#interface fastethernet 0/0
Router(config-if)#ip address 50.0.0.1 255.0.0.0
Router(config-if)#no shutdown
%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up
%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up
Router(config-if)#exit
R4(config)#router ospf 4
R4(config-router)#network 50.0.0.0 0.255.255.255 area 0
R4(config-router)#network 40.0.0.0 0.255.255.255 area 0
R4(config-router)#
00:06:32: %OSPF-5-ADJCHG: Process 4, Nbr 40.0.0.1 on Serial0/0/0 from
LOADING to FULL, Loading Done
R4(config-router)#exit
R4(config)#

PC-1

PC>ipconfig

IP Address......................: 10.0.0.2
Subnet Mask.....................: 255.0.0.0
Default Gateway.................: 10.0.0.1

PC>ping 50.0.0.2

Pinging 50.0.0.2 with 32 bytes of data:

Reply from 50.0.0.2: bytes=32 time=156ms TTL=124
Reply from 50.0.0.2: bytes=32 time=127ms TTL=124
Reply from 50.0.0.2: bytes=32 time=156ms TTL=124
Reply from 50.0.0.2: bytes=32 time=140ms TTL=124

Ping statistics for 50.0.0.2:
    Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
    Minimum = 127ms, Maximum = 156ms, Average = 144ms
PC>

PC-2

PC>ipconfig

IP Address......................: 50.0.0.2
Subnet Mask.....................: 255.0.0.0
Default Gateway.................: 50.0.0.1

PC>ping 10.0.0.2

Pinging 10.0.0.2 with 32 bytes of data:

Reply from 10.0.0.2: bytes=32 time=140ms TTL=124
Reply from 10.0.0.2: bytes=32 time=141ms TTL=124
Reply from 10.0.0.2: bytes=32 time=157ms TTL=124
Reply from 10.0.0.2: bytes=32 time=156ms TTL=124

Ping statistics for 10.0.0.2:
    Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
    Minimum = 140ms, Maximum = 157ms, Average = 148ms

You can verify that ospf is running successfully via show ip protocols command in privilege mode.

R4#show ip protocols

Routing Protocol is "ospf 4"
  Outgoing update filter list for all interfaces is not set
  Incoming update filter list for all interfaces is not set
  Router ID 50.0.0.1
  Number of areas in this router is 1. 1 normal 0 stub 0 nssa
  Maximum path: 4
  Routing for Networks:
    50.0.0.0 0.255.255.255 area 0
    40.0.0.0 0.255.255.255 area 0
  Routing Information Sources:
    Gateway         Distance      Last Update
    40.0.0.1             110      00:01:26
  Distance: (default is 110)

R4#

You can use show ip route command to troubleshoot ospf network. If you did not see information about any route checks the router attached with that network.

R4#show ip route
Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP
       D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
       N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
       E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP
       i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area
       * - candidate default, U - per-user static route, o - ODR
       P - periodic downloaded static route

Gateway of last resort is not set

O    10.0.0.0/8 [110/1564] via 40.0.0.1, 00:02:37, Serial0/0/0
O    20.0.0.0/8 [110/1563] via 40.0.0.1, 00:02:37, Serial0/0/0
O    30.0.0.0/8 [110/782] via 40.0.0.1, 00:02:37, Serial0/0/0
C    40.0.0.0/8 is directly connected, Serial0/0/0
C    50.0.0.0/8 is directly connected, FastEthernet0/0
R4#

To test ospf routing do ping from pc1 to pc2 and vice versa. If you get replay then you have successfully configured ospf routing but if you did not get replay double check this configuration and try to troubleshoot. I have uploaded a configured and tested topology in case you are unable to locate the problem spot then download this configuration file. And try to find out where have you committed mistake

ospf routing configurations

Configuration command of OSPF

Commands	Descriptions
Router(config)#router ospf 1	Starts OSPF process 1. The process ID is any positive integer value between 1 and 65,535.
Router(config-router)#network 172.16.0.0 0.0.255.255 area 0	OSPF advertises interfaces, not networks. Uses the wildcard mask to determine which interfaces to advertise.
Router(config-if)#ip ospf hellointerval timer 20	Changes the Hello Interval timer to 20 seconds.
Router(config-if)#ip ospf deadinterval 80	Changes the Dead Interval timer to 80 seconds.
NOTE: Hello and Dead Interval timers must match for routers to become neighbors
Router#show ip protocol	Displays parameters for all protocols running on the router
Router#show ip route	Displays a complete IP routing table
Router#show ip ospf	Displays basic information about OSPF routing processes
Router#show ip ospf interface	Displays OSPF info as it relates to all interfaces
Router#show ip ospf interface fastethernet 0/0	Displays OSPF information for interface fastethernet 0/0
Router#show ip ospf border-routers	Displays border and boundary router information
Router#show ip ospf neighbor	Lists all OSPF neighbors and their states
Router#show ip ospf neighbor detail	Displays a detailed list of neighbors
Router#clear ip route *	Clears entire routing table, forcing it to rebuild
Router#clear ip route a.b.c.d	Clears specific route to network a.b.c.d
Router#clear ip opsf counters	Resets OSPF counters
Router#clear ip ospf process	Resets entire OSPF process, forcing OSPF to re-create neighbors, database, and routing table
Router#debug ip ospf events	Displays all OSPF events
Router#debug ip ospf adjacency	Displays various OSPF states and DR/ BDR election between adjacent routers
Router#debug ip ospf packets	Displays OPSF packets

How to get Better Signal Strength on USB Dongles

How to get Better Signal Strength on USB Dongles

radio frequency of a modem is increased when some metallic or Aluminium stuff is near the device,
It attracts the signal and keeps it constant. You will get more powerful network when some aluminium thing like a CD covered with a Aluminum foil is placed near your dongle, Lets see the steps. Take a CD/ DVD, and insert the dongle between its hole and connect the USB extender cable on other side, Now connect the other end of USB cable with your PC and keep or hang your dongle near a window or Open place.
That’s it, bu this way You will notice increased signal strength o which ever operators you are using.
This is quite funny trick but you will notice the difference in your network monitoring status on your data card dashboard. your dongle speed will 100% increase

HOW TO CRACK ANY TYPE OF CD PROTECTION

HOW TO CRACK ANY TYPE OF CD PROTECTION

Using W32Dasm, and HIEW. 

OK, let’s start:
First of all, you have to run the damn game you want to crack, without the CD.
The game, doesn’t work of course, (Please, don’t panic) BUT a window pops up, telling you an error message. 
This error message will help you to crack the game so, you’ve got to remember it.
For example: Please insert the - CD, or: You need the CD to play the - . 
( -, is the game you want to crack). Anyway, if you are so idiot and you can’t remember it, write it, in a little piece of paper.
Now, run Win32Dasm, and on the toolbar, press the first little button on the left, OR, go to Disassembler ->Open file to Disassemble. A menu will pop up. Select the exe which you want to crack. The disassemble, will take few minutes so, I suggest you, to go for shitting.

OK, it finished its process.
Now, in your screen, there is a strange text, and we can’t understand anything of course. Don’t worry, the only thing we have to do, ( If you want, you can change the font), is to click on the String Data References, the button next to the print button (Strn.REF).
You can see a window which is called String Data Items. Scroll down, and try to find the game’s error message. When you’ll find it, double click on it, and then, close the window, to go back to the Win32Dasm text.
As you can see you are somewhere in the CD check routine. This is the message’s place. Now comes the interesting and difficult part, so, be careful.
We don’t know what all these shits mean, BUT we must know the @ offset of every call and jump command.
Write down, every call and jump @ offset number. (You have to be sure, that the OPBAR change its used color to green). You need the number behind the @offset without the h. Let’s go to HIEW, now.

HIEW:
To move up and down, use the cursor keys. Start HIEW. exe.
In the HIEW directory, there is a list of exes and programs. Go to the directory, which you saved the game’s exe, we want to crack, and click on the exe. Click F4, and then, a menu will pop up, with 3 words. Text, Hex, and Decode. Click on Decode, and now, we can understand the list of numbers.
Click F5, and you can now enter the number, we wrote down, in Win32Dasm. Type it, and you will be placed at the number’s place. The cursor is placed on a command.

Before I’ll continue, I want to explain you something. For example, if the command where our cursor is placed on, is E92BF9BF74, means that it is 5 bytes.
Every 2 numbers, are one byte: E9-2B-F9-BF-74 = 90-90-90-90-90. 10 letters, mean, 5 bytes.
OK, if you understood it, you can continue.

Press F3, which means edit, and now you can edit these ten numbers.
Type five times, the number 90. For every byte, 90. Now click on F10 to exit.
We cracked the CD protection

tagged: How to Spy on Cell Phones

Want to learn to spy on cell phones ? Today,I’ll write about software that allows you to spy on cell phone . There are hundreds of cell phone spy software applications on the market, where many of them are nothing more than a crap. Some are good and only a few of them are the best. Also, each spy software has a different set of features and operating format which makes it hard for the novice users (perhaps like you) to make the right choice so as to fit your spying needs.

So, in order to help our readers find the best spy software, I have decided to give a thorough review of the Top 2 Best Selling spy phone software on the market.

1. SpyBubble – (TESTED)
2. SpyPhone GOLD – (TESTED)

SpyPhone GOLD and SpyBubble are the current leaders in the market which are used by thousands across the globe to spy on a cheating spouse, monitor employees and keep an eye on their teens. Here is a complete review of these two products:

1. SpyBubble Review:

Although SpyBubble is not as feature rich as SpyPhone GOLD, it offers a good bunch of features that every spy software should have. It is a very good choice for those who are looking for a mid-range spy software at an affordable price.

How it Works?

After your purchase, you can directly download the installation module onto the target cell phone. Installation takes only a few minutes (2-3 min approx). After the installation, each activity on the target phone is recorded and uploaded onto the SpyBubble servers. You can login to your online account from your PC (or any computer) to view the logs at any time. The logs contain Text messages, Contacts List, Call History, GPS Locations and many such information.

Call Interception: When the target cell phone is on the conversation, you will receive a secret SMSnotification on your phone. At this time you can call the target phone to listen to the live conversation going on. All this process takes place in complete stealth mode and is 100% undetectable!

SpyBubble Features:

SpyBubble offers every common feature such as recording Call Logs, SMS, GPS Locations, IM Conversations, Web Activities, Emails etc. It is very similar to Spy Phone Gold but lacks the vital features like call recording and call interception. Thus with SpyBubble you cannot listen to live calls on the target cell phone.

Compatible Cell phones:

SpyBubble is compatible with Nokia (Symbian), Samsung (Android), Apple iPhones, Blackberry and Windows Mobile Phones.
You can download SpyBubble from the following link:

Download SpyBubble

2. SpyPhone GOLD Review

Spy Phone GOLD is is the No.1 spy software on the market which turns any compatible cell phone into a spy phone within minutes. It offers every feature that a true cell phone spy software should have. Hence most people choose Spy Phone GOLD for their cell phone spying needs.

How SpyPhone GOLD Works?

The working of SpyPhone GOLD is exactly same as that of SpyBubble.

SpyPhone Gold Top Features:

• Call Interception – Listen to the actual calls LIVE on the target cell phone
• Environment Listening – Make a spy call to the target cell phone running SPY PHONE and listen in to the phone’s surroundings.
• SMS Logging – Records both incoming & outgoing SMS
• SIM Change Notification – Get instant notification via SMS when the target cell phonechanges it’s SIM
• Remote Control – Send secret SMS to the target phone to control all functions
• Spy from any location across the world
• 100% Undetectable

Compatible Cell Phones:

1.Nokia, LG, Samsung and Sony Ericsson Phones (Symbian & Android)
2.BlackBerry Phones
3.Apple iPhones
4.Windows Mobile Phones

Download SpyPhone GOLD

SpyPhone GOLD vs SpyBubble:

Which Cell Phone Spy Software to Choose?

If you ask me, SpyBubble is my choice! This is because, this feature rich software at a very low price of $49.95 is nothing more than a steal. If you’re looking for a mid-range spy software at an affordable price then this should be your choice.

However, if you want a high-end spy software with top features like call interception and call recording then you may go for SpyPhone GOLD. You may end-up paying a bit high, but it is worth the features it offers.

So, what are you waiting for? Go grab one of them from the following links now:

1. Click Here to Download SpyBubble

2. Click Here to Download SpyPhone GOLD